Using the Chemstractor connected to the Truck Mount.
The carpet has been vacuumed first with the turbine vac, presprayed, agitated with the turbine vac, and about to clean a very soiled breakfast room with the Chemstractor connected to the truck mount.
Cleaned, making vertical strokes, with solution turned on, and extracting.
Cleaned back over the vertical area, making ovals, solution turned off, and extracting.
Cleaned over next area making vertical strokes, solution on, then extracting making ovals coming back, solution off.
About to clean a white nylon, very heavily soiled with a lot of dog body soil. I have already cleaned under the bed with my under bed tool. Picture shows Chemstractor head, and turbine vac connected to the truck mount.
Another angle, prior to cleaning heavily soiled area.
This shows rear of Chemstractor when not connected to Truck Mount.
The Quick Connect on the string is used to clear cold water out of the line from the Truck Mount. I put the QC on the solution line, then put it in the end of the vac hose cuff, turn on the petcock and let run until the solution is hot. Then connect to the Chemstractor.
(150 feet of 2 inch vac hose plus 25 feet of 1 1/2 inch vac hose, from truck to machine.)
Now connected to the Truck Mount and ready to clean.
Room partly cleaned, showing a lot of dog hair pulled loose, not yet vacuumed up.
